A central vacuum, or central vac, is a type of vacuum cleaner installed in a home as a part of the ductwork. The central vac system is usually located in a basement, garage, or utility room, and it uses a long hose to reach all areas of the home. A central vac system is much more potent than traditional vacuum cleaners and can often be operated without carrying a portable vacuum unit.
The hose sucks dirt from around your living area, drastically improving the air quality in your home. In addition, the automatic dustpan, collection container, and collection bin make cleaning the filtered systems and suction unit much more manageable. They transport everything to a remote location located in your storage space.
Table of Contents
What are the main components of a central vacuum system?
The main components of a central vacuum system are the power unit, hose, and attachments. Most people locate their power unit in a basement or garage, where they place the motor and dust collector. You can use the hose to connect the power unit to the various outlets around the home, and they can be up to 50 feet long.
Finally, you can use the attachments to clean different surfaces, and they can include a floor brush, crevice tool, and dusting brush.
Power unit
The power unit is responsible for creating the vacuum that powers the central vacuum system. It does this by drawing air in and then expelling it out of the system. The power unit is usually located in a basement or garage, connected to the system via tubes. It is the heart of the central vacuum system, making it possible for the system to work.
Hose
The vacuum hose in a central vacuum system is responsible for carrying the suction from the vacuum unit to the various outlets throughout the home. The lightweight hose has a self-cleaning feature that helps to keep them free of dust, debris, and dirt.
The hose in a central vacuum system is made out of different materials depending on the manufacturer. Some typical materials used for making hoses are PVC, aluminum, and polyethylene.
Attachments
You can use attachments to clean various surfaces and areas in an existing home’s central vacuum system. For example, you can use it to clean carpets, hardwood floors, upholstery, and more. In addition, there are a variety of attachments available designed for specific cleaning tasks.
Generally, you can use three different types of attachments in central vacuum systems: the floor brush, the crevice tool, and the upholstery brush. You can use the floor brush to sweep and clean hard floors and the crevice tool to get into tight spaces and corners. You use the upholstery brush to clean furniture and other upholstered surfaces.
How does a central vacuum system work?
A central vacuum system works using a powerful motor to create suction inside your existing home. The motor is located in the power unit and connected to the hoses. When you turn on the vacuum, the motor creates suction that pulls dust, dirt, and debris into the motorized unit (1).
The central vac stores the dust, debris, and dirt in a dust collector and expels clean air back into the home, improving the overall air quality.
Related Article: Rainbow Vacuum Cleaner Review
What are the benefits of using a central vacuum system?
There are many benefits to using a central vacuum system, including the following:
They are much more powerful than traditional portable vacuum cleaners, so they can remove more dirt and debris.
There are many factors to consider when determining the power of a central vacuum system. For example, the size of the home, the type of flooring, the amount of debris, and the number of people using the system all play a role. With that being said, central vacuum systems are much more powerful motors than a portable vacuum cleaner.
Generally speaking, central vac systems are much more potent than traditional portable vacuum cleaners. They design central vacs to work with larger homes and to remove more debris from a centralized area. Central vac systems can range in suction power from 500 watts to 1,500 watts.
The size of the home will generally dictate the amount of suction power needed. For example, a central vacuum system for a small home may only need 500 watts of power, while a system for a large home may need up to 1,500 watts. A portable vacuum cleaner requires only about 120 volts of power to operate.
They don’t require you to carry the vacuum around, so they’re easy to use.
You need to do a few things to turn on your central vacuum system.
First, you need to make sure that the power unit is plugged into an outlet and turned on.
Then, connect the hose to the inlet valve.
Finally, turn on the suction by flipping the switch on the power unit.
A central vacuum unit can take anywhere from a few minutes to an hour to clean a house. It depends on the size of the unit and the amount of dirt in the house. Therefore, the average person can spend about 30 minutes per day vacuuming their home with a central vacuum unit.
They’re less likely to cause allergies because the dust, debris, and dirt are stored in a sealed power unit.
Central vacuum units effectively clean dust, debris, and dirt in any living area. They can reach deep into cracks and crevices, ensuring that all the dust, debris, and dirt are removed from any living area. This leaves your home clean and fresh while improving indoor air quality.
Typically, one stores the collected debris in a central vacuum unit’s dustbin or debris container. Unfortunately, these are usually located near the unit’s motor, making them difficult to access for cleaning, depending on the central vacuum unit and house design.
Some units have a self-cleaning feature that periodically empties the dustbin or debris container, but this may not effectively get all the debris out. If your unit does not have a self-cleaning feature, you should clean out the sealed power unit of your central vacuum unit at least once a year.
They’re low maintenance because you don’t have to replace bags or filters.
Another advantage of central vacuum units is that they are low maintenance. For example, you do not have to replace bags or filters as often as traditional vacuums.
They collect dirt in a sealed power unit with a central vacuum unit. This means that there is no need to replace bags or filters as often. You may need to replace the bag or filter only if the unit is not functioning correctly or if it becomes clogged.
They’re durable and built to last.
Central vacuum units are also very durable and built to last. This is because they design them for heavy-duty use. In addition, they make them with high-quality materials that can withstand a lot of wear and tear.
The materials used to make central vacuum systems vary depending on the system. However, some of the most common materials used in these systems include metals such as aluminum and stainless steel and plastics such as polyethylene or PVC pipe (2).
They’re quiet because the motor is located in a separate central vacuum power unit.
Central vacuum units are also quieter than traditional vacuums because the motor is located in a separate unit. This means that the only noise you will hear is the sound of the motor running.
The power unit of a central vacuum system is typically located in a garage or basement storage room, away from living areas. This helps reduce the noise produced by the unit, making it more pleasant for you to vacuum your home.
They increase the value of your home.
Another advantage of central vacuum units is that installing a central vacuum unit can increase the value of your home. This is because potential buyers will see that your home has a high-quality vacuum system in place.
A central vacuum system is a valuable addition to any home. If you are thinking about selling your home, installing a central vacuum system can help you to get more money for your home.
Central vacuum systems installation
There are a few things to keep in mind when installing central vacuum systems.
First, you’ll need to determine the best location for the unit. It’s essential to find a spot close to outlets and where the unit won’t be in the way.
Second, you’ll need to have the proper tubing and hoses installed. This is typically done by the professional who installs the system, but it’s important to make sure that they correctly install everything before they leave.
Third, you’ll need to test the system to ensure it’s working correctly. You can do this by running the vacuum cleaner for a few minutes to ensure that it’s picking up dirt and debris.
Fourth, you’ll need to maintain the system regularly. This means emptying the canister and cleaning the filters regularly.
What are beam central vacuum systems?
Beam central vacuum systems are designed to remove dirt, dust, and debris from your home by using a powerful central unit connected to strategically placed inlets throughout your home. Beam central vacuum system inlets allow you to quickly and easily connect your vacuum hose, making it easy to clean every nook and cranny of your home.
The powerful suction of a Beam central vacuum system can help you achieve a deeper clean and make cleaning up after pets a breeze. In addition, Beam central vacuum systems can help improve your home’s indoor air quality by reducing the number of allergens and other particles circulated through your home.
Central vacuum systems cost
The central vacuum system cost can vary depending on the size of your home and the type of system that you select. However, you can expect a central vacuum system cost to be anywhere from $500 to $3,000. If you consider adding a central vacuum system to your home, consult with a professional to ensure that you select the right system.
Sources
(1) – https://home.howstuffworks.com/vacuum-cleaner.htm
(2) – https://www.ppfahome.org/blogpost/1851733/345598/Plastic-Pipe-101-CPVC-vs-PVC-vs-PEX